FlashCooling technology

Printable Version

FlashCooling® technology

Advanced and ultra high-strength steels (AHSS and UHSS) require more complex heating and cooling cycles for continuous annealing and galvanizing lines. High cooling rates combined with uniform temperature distribution keep the strip in proper shape during the cooling stage. It is key to producing AHSS and UHSS grades, such as those required in automotive steel processing. Fives has designed a range of FlashCooling® technologies for vertical annealing and galvanizing furnaces to cover any cooling rate, from 50˚C/sec up to 1000˚C/sec.

 

FlashCooling® technologies for wet and dry processes have been developed to meet this need, providing very fast cooling in vertical Stein Digiflex® furnace:

  • 50 to 200°C/sec (1 mm thick) in dry condition (5 to 75% H2)
  • Up to 1000°C/sec to process latest AHSS grades (MS, Q&P, etc.)
  • 8 patents in application
  • More than 40 units operating
FlashCooling® technology

History of FlashCooling® technology development

Fives has developed the FlashCooling® technology at its own test centre by building several scale 1 test benches. The research works were conducted together with renowned institutes specializing in aerodynamics (Institut Aérotechnique, Saint-Cyr-l'École, France) and fluid flow thermal transfer (Brno University of Technology, Czech Republic). The new technology was tested and optimized in a pilot bench facility before being introduced to the market for hot dip galvanizing lines operating wet or dry processes. 

Fives implemented its first high H2 rapid cooling system in 1998 for the vertical furnace in a 1 million t/y continuous annealing line in Europe. The FlashCooling® technology is now in operation in about 40 continuous annealing and galvanizing lines worldwide.

Dry FlashCooling® technology

The Dry FlashCooling® system is Fives' patented technology. It has come to be the standard for continuous galvanizing lines (CGL). The first dry FlashCooling® system was installed at British Steel (now Tata Steel) in Port Talbot, Wales (UK) in 1999. It operated with 50% hydrogen to increase the cooling capacity. Today, installations with up to 75% hydrogen and cooling rates of 200˚C/sec are not uncommon.

Dry FlashCooling® benefits

  • High operation flexibility with atmosphere gas blowing 5-75% H2
  • Full lengthways and crosswise control of cooling rate
  • Symmetrical blowing and rear central exhaust for perfect strip stability
  • Design and control features to avoid strip cool buckling and mistracking
  • Approved safety

Wet FlashCooling® technology

The Wet FlashCooling® system is Fives' patented technology. Nitrogen is blown with water mist, which offers greater flexibility in operation in terms of cooling rate control, temperature cycle control and uniformity of cooling. This modern technology has replaced the more conventional method involving water quenching of the strip. It was introduced on the continuous annealing line at POSCO’s Gwangyang Steelworks in 2008.

Wet FlashCooling® benefits

  • Very high cooling rate in a controlled manner up to 1,000˚C/sec
  • High cooling rate flexibility: range 1 – 10
  • Unique capability to control all process parameters including exit strip temperature (600˚C to 100˚C)
  • State-of-the-art control system for crosswise temperature uniformity and buckling prevention

⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.

In order to address your request, we need to collect the information listed in the form below

Information on data processing

As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.

The data collected are exclusively for the use of FIVES departments.

Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.

These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.

In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).

To find out more about our personal data protection policy click here


*

Despatch of these emails is managed by a FIVES partner located in the United States, an active member of Privacy Shield. The partner guarantees processing compliant with European requirements for personal data protection. Unsubscribe with a single click on a link in the message received.


* required fields

Your message has been sent and will be treated as soon as possible. Thank you for contacting Fives.

Sorry, we encountered a problem, your message was not sent