NeoKoil, silicon steel processing lines
Silicon steel also known as electrical steel (0.5 to 4.5% of silicon) is traditionally used in the production of transformers, inductors, motors and generators, and is gaining applications in the energy, electric car, appliances, and modern generator/transformer markets. It's a special steel tailored to produce specific magnetic properties, resulting in low power loss per cycle, low core loss, and high permeability that is extremely sensitive to produce.
Fives designs and supplies NeoKoil® silicon processing lines and cold rolling mills dedicated to the production of non-grain oriented (NGO) and grain oriented (GO and HiB) grades. The scope of supply includes annealing & pickling lines (APL) and annealing & coating lines (ACL) for NGO grades; as well as decarburizing & coating lines (DCL) and flattening & coating lines (FCL) for GO grades.
Fives provides process expertise, energy-saving technologies and proprietary equipment, including DMS 20Hi cold rolling mills, complete terminal equipment, degreasing sections, annealing furnaces and curing ovens, furnace atmosphere management solutions (decarburization, nitriding, etc.) and induction heating technologies.
Cold rolling mills

The DMS 20Hi cold rolling mill offers simple and safe operation and maintenance, as well as optimum strip productivity, high rolling speeds and a minimum strip thickness of 0.04 mm. Recent improvements include 10% increase in strip productivity; improved strip flatness tolerances for GO, NGO or HiB quality; fast and reliable mill/wiper roll change and a cleaner operating environment.
Entry coil handling section

The entry coil handling section is engineered to handle the coil very carefully, ensuring minimal waste and optimal product quality.
It includes entry coil skid and car, pay off reel, threading pinch roll and flattener, shearing section (entry shear and scrap evacuation system) and coil joining section (welder and notcher).
More about the entry coil handling section
More about DMS OptiLine™ software
Thermal part

Fives offers horizontal type furnaces with the AdvanTek® combustion system and compact jet coolers, Stein curing ovens and induction heating technologies to follow stringent thermal process requirements. It includes the best availbale technology for furnace atmosphere management with proprietary seal gates and analysis systems for high H2 and wet/dray atmospheres to reach the required properties of silicon steels.
More about AdvanTek® combustion system
More about Stein curing ovens
More about CELES EcoTransFlux™ and CELES induction heaters
Exit coil handling section

Fives’ mechanical solutions, including side trimming for the exit coil handling section ensure minimized waste and achieve the desired throughput.
More about the exit coil handling section
More about DMS side trimmers
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here