Stein bogie hearth furnace

Printable Version

Stein bogie hearth furnace

Stein bogie hearth furnaces offer heat treatment temperatures typically ranging from 600 ºC up to 1350 ºC depending on the application and with tolerances adapted to each process. Electric heating is also available.

Stein bogie hearth furnace range is used for the heat treatment of bars, plates, coils and tubes, including:

  • Preheating before forging
  • Stress relief in metal products, pressure vessels, rolls, etc.
  • Various annealing processes
  • Quench and tempering
  • Normalizing

Benefits of Stein bogie hearth furnace technology:

  • Low fuel consumption
  • Excellent temperature homogeneity
  • Flexibility of operation
  • Reduced emissions
  • High performance reliability

Fully automated advanced combustion systems include regenerative/self recuperative type, cold/hot air via a recuperator, on/off technology. On/off pulse firing enables efficient combustion and low NOx emissions, while the burners can fire a number of different fuels, including natural gas, LPG, HFO, LDO, kerosene, BFG, COG and mixed gas.

Combustion systems comply with gas appliance regulations and include all measures for safe operation.

Stein bogie hearth furnace range from Fives

Stein bogie hearth furnaces: flexible and efficient

The bogies are loaded outside the furnace and then introduced inside the chamber. They can be motorized by means of a gearbox and rack & pinion driving system or by means of a truck & pulley system. In some applications more than one bogie can be used to reduce handling times (charging and discharging cold and hot loads).

Different multi-layer linings are available, including fibrous materials, dense and light castables for the hearth and specially pre-shaped support blocks. Tightness between the movable hearth and the walls is assured by means of a retractable water (or sand) trough and blades. Tightness between the hearth and the door is done by means of an automatic clamping system.

⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.

In order to address your request, we need to collect the information listed in the form below

Information on data processing

As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.

The data collected are exclusively for the use of FIVES departments.

Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.

These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.

In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).

To find out more about our personal data protection policy click here


*

Despatch of these emails is managed by a FIVES partner located in the United States, an active member of Privacy Shield. The partner guarantees processing compliant with European requirements for personal data protection. Unsubscribe with a single click on a link in the message received.


* required fields

Your message has been sent and will be treated as soon as possible. Thank you for contacting Fives.

Sorry, we encountered a problem, your message was not sent