Carbon steel degreasing
Fives designs and supplies degreasing systems for all steel processes:
- Hydro systems to easily remove oil and fines with a help of water as the degreasing agent. It's a small and simple system which typically makes up a part of cold annealing pickling lines (CAPL) for stainless steel.
- Chemical systems are typically used when the cleanliness requirements are higher or the oil is more difficult to remove from the strip due to its physical properties. These degreasing systems are used in continuous annealing or galvanizing lines (CAL, CGL, CAGL) that don't have a direct fire furnace or very dirty coils are processed.
- Electrolytic degreasing systems are used for exposed automotive coils or when the highest level of cleanliness is required.
Electrolytic degreasing system
The electrolytic degreasing system utilizes a combination of chemical, mechanical and electrolytic degreasing processes to ensure the ultimate degree of strip cleanliness. A typical electrolytic degreasing system consists of:
- Alkaline degreasing
- Brush machines
- Electrolytic treatment
- Rinse sections
- Chemical management and storage
Electrolytic degreasing system innovative design:
- Efficient combination of spraying and dipping of the strip to enhance heat transfer and cleaning effect
- A more effective and reliable system for separation of the metal fines from the process media
- Balancing of the water requirements of the rinsing and degreasing sections to minimize the amount of water and degreasing chemical
- High turbulent circulation to prevent solids from building up in the line tanks
- Unique design of the spray bars and tanks to allow rapid and safe maintenance of the spray bars while the line is running
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here