Cold annealing and pickling lines

Printable Version

Cold rolled steel is typically used in applications that require a high level of precision and better surface quality. Fives has designed NeoKoil® cold annealing and pickling lines (CAPL) utilizing proprietary technologies to ensure optimum product quality and efficiency. The latest reference includes a new CAPL with a production capacity of 500,000 tons per year to produce 200, 300, 400 series stainless steel products for Foshan Chengde Stainless Steel Co. (China). 

The NeoKoil® cold annealing and pickling line features: 

  • In-line trimming and skin-passing 
  • Perfect strip surface quality at end of the line
  • Adaptative design to customers' process flow (leader strip or off gauge smart management, baby coil delivery)
  • Automatic acid monitoring and dosing control
  • Minimum waste generation

Cold rolling mills

Cold rolling mills

The cold rolling mills are essential to reduce strip thickness while guaranteeing strip surface quality. 

The DMS 20Hi rolling mill for stainless steel achieves a maximum rolling speed of 1200 mpm, a minimum strip thickness of 0.04 mm and a maximum strip width of 1880 mm.

More about DMS 20Hi rolling mills
More about DMS wipers

Back to top

Entry coil handling section

Entry coil handling section

The entry coil handling section is engineered to handle the coil very carefully, ensuring minimal waste and optimal product quality.

It includes entry coil skid and car, pay off reel, threading pinch roll and flattener, shearing section (entry shear and scrap evacuation system) and coil joining section (welder and notcher).

More about the entry coil handling section
More about DMS OptiLine™ software

Back to top

Degreasing system

Degreasing system

Fives customizes degreasing systems for cold annealing and pickling lines (CAPL): vertical or horizontal, alkaline or hydro, with pre-degreasing section or without.

Such degreasing systems are tailored to customers’ requirements and built to minimize water consumption and utilize waste heat for a more environmentally-friendly and cost-effective operation.

More about the degreasing system

Back to top

Annealing furnace

Annealing furnace

Stein direct fired furnaces offer flexibility of operation and high quality of strip heating due to the furnace insulation and combustion control design. The furnace is equipped with AdvanTek® direct fired burners which uniformly heat the strip under accurate oxygen level control. The cooling technologies include: combined air and water or pure water cooling (including cooling control crosswise); and mist cooling and associated drying technologies.

More about AdvanTek® combustion system
More about Virtuo®, a thermal performance optimizer

Back to top

Pickling system

Pickling system

Fives’ solutions for strip pickling systems for cold annealing and pickling lines (CAPL) use a pre-pickling stage to fracture the oxide layer in order to produce the high quality surface finish that end users expect. 

The proprietary technology includes Scale-X™ for oxide removal which utilizes an aqueous salt solution to replace electrolytic sodium sulfate. 

More about the pickling system

Back to top

Skin-pass mill

Skin-pass mill

A skin-pass mill is essential for high quality finishing. It removes the yield-point elongation effect and greatly improves the strip surface aspect to reach the 2B standard.

The new DMS SkinPass 2Hi from Fives can process steel sheets up to 1600 mm wide at a high speed. Both in-line and off-line configuration are available, depending on addressed grade portfolio.

More about DMS SkinPass

Back to top

Exit coil handling section

Exit coil handling section

Fives’ mechanical solutions, including side trimming and SIS tuning for the exit coil handling section ensure minimized waste and achieve the desired throughput.

More about exit coil handling section
More about DMS side trimmers
More about SIS tuning

 

Back to top

⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.

In order to address your request, we need to collect the information listed in the form below

Information on data processing

As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.

The data collected are exclusively for the use of FIVES departments.

Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.

These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.

In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).

To find out more about our personal data protection policy click here


*

Despatch of these emails is managed by a FIVES partner located in the United States, an active member of Privacy Shield. The partner guarantees processing compliant with European requirements for personal data protection. Unsubscribe with a single click on a link in the message received.


* required fields

Your message has been sent and will be treated as soon as possible. Thank you for contacting Fives.

Sorry, we encountered a problem, your message was not sent