Fives has been active in the induction heating equipment industry for 50 years and offers CELES induction heating technologies for carbon, stainless and silicon steel grades. High power transverse flux induction heating technology, such as CELES EcoTransFlux™, is able to offer a heating solution for magnetic or nonmagnetic alloys with excellent efficiency at any temperature level.
The concept of induction heating is based on two laws of physics: Lenz Law and Joule Effect. An induction heater consists of an electromagnet, and an electronic oscillator that passes a high-frequency alternating current through the electromagnet. The rapidly alternating magnetic field penetrates the object, generating electric currents inside the conductor called eddy currents. The eddy currents flowing through the resistance of the material heat it by Joule heating.
CELES induction heating technology reduces energy consumption, minimizes environmental impact and cuts costs while meeting high quality & safety standards.
CELES EcoTransFlux™ is high power transverse flux induction heating technology that allows optimization of steel grade metallurgical properties and reduced emissions.
CELES induction heaters
CELES induction heaters are compact heating equipment that provide high performance, increased thermal efficiency and excellent flexibility for strip processing lines.
Induction heating technology advantages
Induction heating is adaptable for most strip processing lines, such as CAL, CGL, CAGL or CGPL for carbon steel, CAPL or BAL for stainless steel, and DCL for silicon steel. The induction solution can be part of preheating, heating, annealing, coating or curing sections of strip processing lines for new or existing facilities.
Induction heating is versatile, compact and economical and clean to operate. Other advantages include:
- Flexibility: no pre-heating is required; energy is transferred directly
- Accuracy: heating is immediate and applied only to a specific area
- Efficiency: the metal is hotter than the source
- Maintenance: high power density and optimal performance
- Modularity: easily integrated into production lines
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here