Bright annealing lines

Printable Version

Bright annealed steel is used for applications requiring a high-shine finish. Special conditions in the vertical furnace avoid oxidation, meaning the mirror-like surface quality is ensured without the need for a pickling section. All aspects of the NeoKoil® bright annealing line (BAL) are designed by Fives to minimize contact with the strip surface so that the final product has a perfect finish.

In this line, the annealing process follows the cold rolling mill as an alternative to the cold annealing and pickling line in order to achieve BA surface quality standard for high-end applications. 

Following a long pioneering tradition, Fives has engineered and supplied the highest capacity BAL, currently in operation with 150,000 tons per year capacity.

Today, a technological breakthrough - CELES EcoTransFlux™, a high power transverse flux induction heating technology, allows Fives to propose to the industry an innovative non-standard annealing technology that can achieve up to 300,000 tpy capacity, being by far the highest production capacity ever reached for the BA product.

Cold rolling mills

Cold rolling mills

The cold rolling mills are essential to reduce strip thickness while guaranteeing strip surface quality. 

The DMS 20Hi rolling mill for stainless steel achieves a maximum rolling speed of 1200 mpm, a minimum strip thickness of 0.04 mm and a maximum strip width of 1880 mm. Fives offeres a new generation DMS 20Hi mills with advanced improvements.

More about DMS 20Hi rolling mills
More about DMS wipers

Back to top

Entry coil handling section

Entry coil handling section

The entry coil handling section includes fully automatic coil loading and handling, coil joining with welding process and notching.

It enables the transportation of the strip into the process section with full control of the strip tension and smooth strip handling (no slippage, thus no marks).

More about the entry coil handling section
More about DMS OptiLine™ software
 

Back to top

Degreasing system

Degreasing system

Fives customizes degreasing systems for bright annealing lines: vertical or horizontal, alkaline or hydro, with pre-degreasing section or without.

Such degreasing systems are tailored to customers’ requirements and built to minimize water consumption and utilize waste heat from other processes for a more environmentally-friendly and cost-effective operation.

More about the degreasing system

Back to top

Annealing

CELES EcoTransFlux™ technology

The special conditions in the furnace enable the high mirror surface finish to be achieved without a pickling section.

The CELES EcoTransFlux™, a high power transverse flux induction heating technology, allows Fives to propose to the industry an innovative non-standard annealing technology that can achieve up to 300,000 tpy capacity.

More about CELES EcoTransFlux™, high-flux induction
 

Back to top

Exit coil handling section

Exit coil handling section

At the exit of the line, special tension reel mandrel technology combined with belt wrapper specific design enable the guaranteed safe and smooth winding of the final coil. For specific applications, DMS 2Hi SkinPass can be fitted in line, together with DMS SideTrim in order to deliver a ready-to-sell product.

More about exit coil handling section
More about DMS side trimmers
More about DMS SkinPass

Back to top

⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.

In order to address your request, we need to collect the information listed in the form below

Information on data processing

As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.

The data collected are exclusively for the use of FIVES departments.

Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.

These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.

In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).

To find out more about our personal data protection policy click here


*

Despatch of these emails is managed by a FIVES partner located in the United States, an active member of Privacy Shield. The partner guarantees processing compliant with European requirements for personal data protection. Unsubscribe with a single click on a link in the message received.


* required fields

Your message has been sent and will be treated as soon as possible. Thank you for contacting Fives.

Sorry, we encountered a problem, your message was not sent